.png)
Main Communication Ports
If you need to adjust your firewall, it is recommended to allow MyQ processes in the firewall and not particular ports. If you allow particular ports, MyQ may stop working if:
you change port settings in MyQ, or
you upgrade to a newer version and the port specification has changed.
Terminal packages may use additional ports. Check the particular terminal package specification for details.
Make sure to create an exception that allows ICMP Echo Requests/Replies (Ping) through your Windows Firewall, as MyQ uses it by default to check the printers' status.
Incoming Ports
The server is listening on the following ports (does not include private ports):
Protocol | Port | Configurable | Description |
|---|---|---|---|
TCP | 21 | Yes (WebUI) | FTP protocol for receiving scans. The server runs only in passive mode and each data connection runs over a dynamic port in the 49152 - 65535 range. |
TCP | 25 | Yes (WebUI) | SMTP protocol for Scan Management function, receiving email notifications from printers, and for receiving emails with jobs. |
TCP | 587 | Yes (WebUI) | SMTPS protocol. Used in the same scenarios as SMTP. |
TCP | 515 | Yes (WebUI) | LPR protocol for print job transmission to the MyQ server. |
TCP | 9100 | Yes (WebUI) | RAW protocol for print job transmission to the MyQ server. |
TCP | 8631 | Yes (WebUI) | IPPS protocol for print job transmission to the MyQ server. |
TCP | 8632 | Yes (WebUI) | AirPrint/MOPRIA protocol for print job transmission to the MyQ server. |
TCP | 8090 | Yes (Easy Config) | HTTP protocol for accessing MyQ web interface, communication with Embedded terminals and job roaming among MyQ servers. |
UDP | 11112 | No | Communication with MyQ Desktop Client (MDC) - former MyQ Smart Job Manager (SJM) and MyQ Smart Print Services (SPS). The answer is returned on a dynamic port in the 49152 - 65535 range. |
UDP | 11108 | No | Communication with old terminals (7.6 and older). |
TCP | 8080 | Yes (Easy Config) | Upgrade only. Obsolete HTTP protocol for accessing MyQ web interface, communication with Embedded terminals and job roaming among MyQ servers. Can be removed in Easy Config and only 8090 can be used. |
PM Server:
Protocol | Port | Configurable | Description |
|---|---|---|---|
TCP | 631 | No | Port for Mobile print via IPP. |
TCP | 717 | No | Port for Mobile print via IPPS. |
TCP | 9090, 9091 | No | Necessary for remote setup of Kyocera embedded terminals. |
TCP | 9092 | No | Felica reader |
TCP | 9093 | Yes (WebUI) | Authentication / Authorization. |
TCP | 9094 | No | Driver access, mobile access. |
TCP | 9095 | Yes (WebUI) | Spooler service. |
TCP | 9097 | Yes (WebUI) | Log information event. |
TCP | 9098 | Yes (WebUI) | Job status event. |
TCP | 9099 | Yes (WebUI) | Thrift access. |
TCP | 9101 | No | User session service. |
Outgoing Ports
The server is connecting to the following ports (does not include localhost connections):
Protocol | Port | Description |
|---|---|---|
TCP | 443 |
|
TCP | 515 | LPR protocol for print job transmission from MyQ to printing devices. |
TCP | 631 | IPP protocol for print job transmission from MyQ to printing devices. |
TCP | 9100 | Raw protocol for print job transmission from MyQ to printing devices. |
TCP | 10040 | MPP/MPPS protocol for print job transmission from MyQ to printing devices. |
UDP | 11108 | Communication with old terminals (7.6 and older). |
You can also setup additional services that require further configuration and their port will often differ:
Protocol | Port | Default | Description |
|---|---|---|---|
TCP | Custom | 110 | Connection to email server via POP3 protocol for receiving jobs via email. |
TCP | Custom | 143/993 | Connection to email server via IMAP/IMAPS protocol for receiving jobs via email. |
TCP | Custom | 25/465/587 | Connection to SMTP server for sending outgoing emails from MyQ. |
TCP | Custom | 389/636/1812 | Connection to Authentication server(s) (LDAP, Radius, ...) for user authentication/synchronization. |
TCP | Custom | 8093 | Connection to MyQ Central Server. |
UDP | Custom | 161 | SNMP protocol for communication with printing devices. Answer from printer is returned on a dynamic port. |
TCP | Custom | - | Connection to External credit account. |
MyQ can connect to dynamic ports in the following contexts:
Protocol | Port | Description |
|---|---|---|
UDP | Dynamic | Communication with MDC (Former SJM and SPS). The port range is 49152 - 65535. |
Embedded Packages Ports
Kyocera | |
If SSL is on, it's used for the following events: | Events are notified internally to the embedded application. No network communication is used. |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. TCP: (OUT) 11108 - TCP link to device. Send request to Printers. Kyocera 8.0+ |
Printer (Protocol: Port - Description) | TCP: (IN/OUT) 11108 - TCP link to device. Usage: Receive requests from Package. TCP: (IN) 10040 - Usage: Use printer as a proxy for TCP communication. UDP: (IN) 11108 in - UDP Link to device. Multipurpose. It dispatches all the received UDP packages. Usage: Receive requests to get local jobs. UDP: (OUT) 11108 - Send broadcast to printers. GetJobs (Local Spooling) TCP: (IN/OUT_ 10030 - TCP link to device. Usage: Receive requests or responses from other devices. TCP: (IN) 10010 - Usage: Receive raw data of print jobs for local direct print job. TCP: (IN) 10011 - Usage: Receive raw data of print jobs for local hold job. TCP: (IN) 10013 - Usage: Receive raw data of print jobs for local delegate job. TCP: (IN) 10020 - Usage: Receive raw data of print jobs for local LPR jobs. TCP: (IN) 10012 - Usage: Receive raw data of print jobs for local pull print jobs (Pull Print).
|
HP | |
If SSL is on, it's used for the following events: | All types of events go through SSL |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. |
Printer (Protocol: Port - Description) | (OUT) 57627 - non SSL (OUT) 7627 - SSL |
Toshiba | |
If SSL is on, it's used for the following events: | All types of events go through SSL |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. |
Printer (Protocol: Port - Description) | (OUT) 49629, 50083 - non SSL (OUT) 49630, 50083 - SSL |
Xerox | |
If SSL is on, it's used for the following events: | Always SSL |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. |
Printer (Protocol: Port - Description) | HTTP: (OUT) 80 - Used to access to Xerox EIP SNMP: (OUT) 161 - Used to set up the configuration of the printer. |
Canon | |
If SSL is on, it's used for the following events: | Events are notified internally to the embedded application. No network communication is used. |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. TCP: (OUT) 11108 - TCP link to device. Send request to Printers. |
Printer (Protocol: Port - Description) | TCP: 11108 - TCP link to device. Usage: Receive requests from Package. TCP: 10040 - Usage: Use printer as a proxy for TCP communication.
|
Ricoh | |
If SSL is on, it's used for the following events: | Events are notified internally to the embedded application. No network communication is used. |
Printer (Protocol: Port - Description) | TCP: 49109 - sends live application logs from the device. TCP: 11108 - TCP link to device. Usage: Receive requests from Package. TCP: 10040 - Usage: Use printer as a proxy for TCP communication. UDP: 11108 in - UDP Link to device. Multipurpose. It dispatches all the received UDP packages. Usage: Receive requests to get local jobs. UDP: 11108 out - Send broadcast to printers. GetJobs (Local Spooling) TCP: 10030 - TCP link to device. Usage: Receive requests or responses from other devices. TCP: 10010 - Usage: Receive raw data of print jobs for local direct print job. TCP: 10011 - Usage: Receive raw data of print jobs for local hold job. TCP: 10013 - Usage: Receive raw data of print jobs for local delegate job. TCP: 10020 - Usage: Receive raw data of print jobs for local LPR jobs. TCP: 10012 - Usage: Receive raw data of print jobs for local pull print jobs (Pull Print). Note: Other ports used by the printer (common for all printers. Eg 9100 for raw printing, etc.). |
Sharp | |
If SSL is on, it's used for the following events: | All types of events go through SSL. |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. |
Printer (Protocol: Port - Description) | Any port from the <0-65535> range. Default:
|
Epson | |
If SSL is on, it's used for the following events: | All types of events go through SSL. |
MyQ Server (Protocol: Port - Description) |
|
Package (Protocol: Port - Description) | HTTP: (IN) 8081 to 8089 (default) - It depends on the port selected during the installation of the package on the server. This is used only in localhost. |
Printer (Protocol: Port - Description) |
|
Some of the above mentioned ports can be changed in case of conflicts with other applications.
Conflicts of the communication ports with other software will be revealed by the Windows socket error 10048 error message.