Skip to main content
Skip table of contents

System Requirements

The operating system and other software require their own additional system resources. The system requirements described below are only for MyQ solution.

MyQ Print Server - Site mode (Central Server & Site Servers architecture) 

Site servers Hardware requirements up to 30 000 devices

1-10
devices

11-100
devices

101-300
devices

301-600
devices

601 - 30 000
devices

Physical Core

5

6

8

10

10

RAM

6GB

8GB

12GB

14GB

14GB

Minimum number of servers

1x Central server
1x Site server

1x Central server
1x Site server

1x Central server
1x Site server

1x Central server
1x Site server

1x Central server
More Site servers with max 600 devices each

Storage space

30GB

33GB - 350GB

380GB - 1TB

1,4T - 2TB

2TB per 600 devices

(calculated with AMD Ryzen Threadripper 1920X 3,5GHz)

For the MyQ Central Server Hardware specification, check the MyQ Central Server guide.

Valid for a typical use case:

  • Print job spooling via Windows spooler or directly to MyQ print queue

  • Integrated Firebird database - installed automatically

  • Activated Job Parser

  • Activated Credit Accounting

  • Activated Quota

  • Activated Job Archiving

  • High number of Office documents printed via email/web/mobile

  • Use of MyQ Desktop Client (MDC) or

    • Use of MyQ Smart Job Manager (SJM)

    • Use of MyQ Smart Print Services (SPS)

  • Watermarks used in queues

  • Heavy usage of MyQ API

  • 170 users per device (up to 100 000 users total)

  • Heavy printing

  • 30% active user sessions at once

  • Embedded terminal installed on all devices

  • User synchronization from Central Server

  • Data replication to Central Server

Recommendations

  • Install Windows updates out of working hours.

  • Always monitor the server performance during peak usage hours and adjust the settings accordingly.

  • Changing the power plan of Windows Server in Control Panel – Hardware – Power Options from Balanced (the default setting) to High performance is recommended to utilize the maximum performance. This may help speed up database operations.

It is possible to install MyQ Central Server and MyQ Site Server on one Server, but it is recommended only for small installations (small Site Server). In this case, the HW requirements for both MyQ Central and MyQ Site Server need to be taken into account.

MyQ Print Server - Standalone mode

MyQ Print Server Hardware requirements up to 600 devices


1-10
devices

11-100
devices

101-300
devices

301-600
devices

Physical Core*

3

4

6

8

RAM

6GB

8GB

12GB

14GB

Storage space

30GB

33GB - 350 GB

380GB - 1TB 

1,4TB - 2TB

*It is recommended to use +1 physical core if Credit/Quota is used.
(calculated with AMD Ryzen Threadripper 1920X 3,5GHz)

Valid for a typical use case:

  • Print job spooling via Windows spooler or directly to MyQ print queue

  • Integrated Firebird database - installed automatically

  • Activated Job Parser

  • Activated Job Archiving

  • High number of Office documents printed via email/web/mobile

  • Use of MyQ Desktop Client (MDC) or

    • Use of MyQ Smart Job Manager (SJM)

    • Use of MyQ Smart Print Services (SPS)

  • Watermarks used in queues

  • Heavy usage of MyQ API

  • 170 users per device (up to 100 000 users total)

  • Heavy printing

  • 30% active user sessions at once

  • Embedded terminal installed on all devices

Recommendations

  • Install Windows updates out of working hours.

  • Always monitor the server performance during peak usage hours and adjust the settings accordingly.

  • Changing the power plan of Windows Server in Control Panel – Hardware – Power Options from Balanced (the default setting) to High performance is recommended to utilize the maximum performance. This may help speed up database operations.

Storage

The MyQ Print Server installation files are approximately 700MB.

The annual printing volume for 1 printer is approximately 10,000 jobs; it is possible to multiply this value for the particular number of printers.

MyQ data folder (jobs, main database, and log database increasing):

10k jobs

100k jobs

1M jobs

35GB

300GB

3,5TB

Counted for jobs with 2,9MB size.

By default, jobs are deleted every 7 days.

The Job archiving feature needs additional free space in data storage due to used configuration.

A dedicated disk for MyQ Data storage (jobs, main database and log database) is recommended.

During upgrades of the MyQ Print Server system, the actual size of the MyQ installation on the server (including MyQ database) may temporarily grow up to four times.
The size of the MyQ database depends on the size and complexity of your printing environment (number of users, printing devices, sent jobs etc.).

Storage performance
  • minimum 100 IOPS required.

  • RAID data storage supported.

  • for systems with a large number of direct queues, it is strongly recommended using SSD.

MyQ Desktop Client

If there are 100 - 1000 or more client computers using MyQ Desktop Client (MDC) (or MyQ Smart Job Manager (SJM) and/or MyQ Smart Print Services (SPS)), the MyQ Print Server requires 2+ physical cores just for the MyQ Desktop Client operations. The recommended configuration may vary according to the system load.

Recommended no. of users and groups

Users: up to 100,000 (30,000 - 60,000 per one synchronizing line). Depends on the length and number of fields for synchronization.
Groups: up to 40,000/10 tree levels (group in group in group). Each user can be in up to 50 groups.

Operating System

Windows Server 2012/2012 R2/2016/2019/2022, with all the latest updates; only 64bit OS supported.
Windows 8.1/10/11**, with all the latest updates; only 64bit OS supported. Be aware of the connection limit of up to 20 clients (Windows EULA).

**For the trouble-free running of the machine, it is strongly recommended using a Windows Server OS.

Additional software required

Microsoft .NET Core 6.0 is installed automatically at the beginning of the MyQ installation. If installation fails, the installer can not proceed, and the installation is terminated. In such case, .NET Core 6.0 has to be installed prior to MyQ installation manually.

Microsoft .NET Framework is not automatically installed and needs to be installed prior to running MyQ installation.

We recommend enabling automatic .NET updates using Microsoft Update, learn how to do so here.

Windows Server 2022 Core

If the Easy Config does not launch, it may be necessary to install Server Core App Compatibility Feature on Demand in Windows Server. It can be installed from PowerShell as a Windows Update using this command: 

Add-WindowsCapability -Online -Name ServerCore.AppCompatibility~~~~0.0.1.0

Restart the server after installation is finished.

Web browser

  • Microsoft Edge 91 or higher (Recommended)

  • Google Chrome 91 or higher

  • Mozilla Firefox 91 or higher

  • Apple Safari 15 or higher

  • Opera 82 or higher

  • Internet Explorer and MS Edge Legacy are no longer supported

WebSocket notifications only work with valid certificates in some browsers. Some MyQ features may have limited functionality without them, and it's recommended to have them valid and installed on all client devices.

Security

DigiCert Global Root CA certificate (required for Installation Key license activation) → https://www.digicert.com/kb/digicert-root-certificates.htm#roots
It should be included by default in the latest updated Windows versions.
Supported Public Key Infrastructure for asymmetric cryptography.

Limitations:

  • To make sure that the MyQ system runs smoothly, you need to set an exception for MyQ in your antivirus setup.

  • MyQ should not be installed on a Domain Controller.

MyQ installation in Private cloud

MyQ can also be installed in Private Cloud. For requirements and further details, see Installation in Private Cloud.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.