Skip to main content
Skip table of contents

Activating and deactivating printing devices

Unless it was automatically activated during printer discovery, a newly added device is not active in MyQ and some of its data is not displayed (its serial number, type, counters, etc.). The next step is to activate the device. Although there is no limit to the number of printing devices you can add to the MyQ system, you cannot activate more printing devices than your license allows.

To activate selected printers:

  1. After selecting the printers, right-click and click Set configuration profile. A pop-up window with the same name opens.

    Set configuration profile
  2. Select a profile from the drop-down and click OK.

  3. With your selection still intact, right-click once more and select Activate.

To activate all printers:

  1. On the bar at the top of the Printers main tab, click Actions. The Actions drop-down appears.

  2. Click Activate all.

To deactivate printing devices

  1. On the list of printers on the Printers main tab, select the devices that you want to deactivate, and then click Actions. The Actions drop-down appears.

  2. In the drop-down, click Deactivate.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.