Release Notes

MyQ Sharp Embedded Terminal 10.1

Minimum requested support date: 1 February, 2023

18 July, 2024

Improvements

NEW FEATURE Now it is possible to specify if the MyQ server address is set as SMTP server on the print device during remote setup (Print server 10.2+ is required).
It is possible to disable Automatic configuration of the device during remote configuration.

Bug Fixes

25 June, 2024

Improvements

Continuous scan is forced for Easy scan in the case of duplex settings for scan from the glass.
Continuous scan is forced for Easy copy in the case of duplex settings for copy from the glass.

Bug Fixes

Jobs that were not printed because the printing of the jobs was stopped after logging off cannot be reprinted during the next user session.
Terminal activation is failing with "Activation is failing because MFP front panel is in simulation mode or some other state than the usual screen" visible in the server log.
Card reader does not work after main power switch is used for the full turn off & turn on of the device.

Improvements

Certificates are not automatically installed on the device during remote setup and must be installed manually if the server is set to Manual Certificate Management (valid for Print Server 8.2 (Patch 45), 10.1 (Patch 10), or 10.2 RC 8+).

Bug fixes

ID card is enabled in the device settings during remote configuration even if the card login method is not enabled.

Bug fixes

MyQ Sharp Embedded Terminal cannot be used on the same server as MyQ Sharp Luna Embedded Terminal.

9 February, 2024

Improvements

Device default language is set to server default language during remote configuration. Device default language is not changed if the server default language is not available in the device.
Easy Scan - continuous scanning from the glass or Automatic Document Feeder is possible. It is also possible to combine both sources.

Bug Fixes

Automatic remote configuration fails if the device default language is not set to English.
Some icons on the account selection screen and in Easy Print are blurred on devices with the old OSA platform.
The back arrow is missing in the top menu folders on devices with the old OSA platform.
The Print All button does not automatically refresh when the job is spooled via MDC during the user session.

26 January, 2024

Improvements

NEW FEATURE Job Preview: Preview your jobs directly on the device screen.
NEW FEATURE Folder browsing for Easy Scan: Browse your cloud storage and select a folder directly from the device screen.
NEW FEATURE Easy Print: Browse your cloud storage and print files directly from the device screen.
NEW FEATURE Cost centers are supported.
Improved user interface with new icons and rounded action buttons in the style of MyQ Server 10.1.
QR code is now displayed as the default option for login instead of keyboard.
Print option displaying Job Cost.
Information about trial licenses is displayed on the login screen.
Information about Education or Government license edition is displayed on the login screen.
Print option displaying Job Cost.
Used values are displayed for used default Easy actions parameters.
Logs from the Sharp Embedded terminal are logged to the main server log using the "Sharp Terminal" subsystem.