Adding and editing SNMP v1 and v2c profiles
With the SNMP v1 and v2c protocols, a single string called "SNMP Community string" is used to allow access to the device. Only two parameters need to be set in MyQ: the SNMP read community parameter and the SNMP write community parameter. Their values have to match the values of their counterparts on the printer’s Web User Interface (Read Community, Write Community).
To add a new SNMP v1 or v2c profile:
On the MyQ Web Admin Interface, open the SNMP settings tab (MyQ, Settings, SNMP).
On the bar at the top of the SNMP tab, click +Add SNMP profile, and then click +SNMP v1 or +SNMP v2c on the shortcut menu. The new SNMP profile properties panel opens on the right side of the screen.
On the panel, enter the name of the profile, set the parameters, and then click Save. The new profile is displayed on the list on the SNMP settings tab.
To open and edit a SNMP v1 or v2c profile
To open the SNMP profile properties panel, select the profile on the SNMP settings tab, and then click Edit (or right-click the profile, and then click Edit on the shortcut menu, or double-click on the profile). The profile's properties panel opens on the right side of the screen.
On the SNMP profile properties panel, you can change the profile’s name and enter the values of the SNMP read community parameter and the SNMP write community parameter, according to the values that are set on the printer's Web User Interface.
Click Save to submit and store the changes.