Skip to main content
Skip table of contents

Adding ScannerVision as a Terminal action in MyQ

After configuring ScannerVision (network settings, templates, clients, users), you should create a MyQ Smart Workflow in Terminal Actions.

  1. Go to MyQ, Settings, Terminal Actions.

  2. Right-click on Home screen, select Add action into this folder, and then click on External workflow on the list of actions. The action is added to the list and the terminal preview. Double-click on it to modify its settings. The node's properties panel opens on the right side.

    Adding the External Workflow terminal action
  3. Fill out the External workflow as follows:

    External Workflow properties

    a. Enter a Title. After saving, this will be shown as the name of the External workflow action in the Home screen pane and on the terminal preview.
    b. Enter the URL of the ScannerVision server; ScannerVisionServer:port. http or https depends on the ScannerVision server settings.
    The port number is not required if the default settings (80 for non SSL and 443 for SSL) are used on the ScannerVision server. If the port was changed, the port number is required.
    For example: for SSL only with the default port used and for non SSL and the port was changed from 80 to 81.
    c. Change the Printers and/or Rights if you want to create a specific MyQ Smart Workflow.
    d. Click Save.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.