Report values description
Description of values in the reports' default and additional columns and how they are accounted.
These values are accounted as page counts in the following way: 2 clicks for the A3/Ledger page format and 1 click for the rest (A4 etc..); in case of Duplex, it is 4 clicks for the A3 / Ledger format and 2 clicks for the rest (A4 etc.). L formats are coverage counters.
Single color copy
Color pages (L1)
Color cost (L1)
Color pages (L2)
Color cost (L2)
Color pages (L3)
Color cost (L3)
Print color pages (L1)
Copy color pages (L1)
If discounts are used, they are not applied to all “cost” values in reports, e.g. Color cost (L1)", "Color cost (L2)" or "Color cost (L3). However, "Total cost", "Color cost" do reflect discounts.
These values are accounted as paper sheets in the following way : 1x A3 / 1x A4 etc.
Rest of the paper formats
These values are accounted as paper sheets as well, however, when a printing device is used without an installed Embedded terminal, this counter is specified via SNMP and depends on the counter used from the printing device.
A job printed in 1x A3 monochrome sheet, on both sides in duplex mode, on a device where an Embedded terminal is installed, is accounted in MyQ as 1x A3 paper + 4x print monochrome and 1x duplex. In the MyQ log it will look like this:
PM=4, A3=1, Duplex=1