Skip to main content
Skip table of contents


Server Requirements

  • MyQ Server 7.2 and higher.

  • MyQ Server with an Enterprise license.

  • The Credit feature must be enabled on the MyQ Server.

  • External Payment Providers must be enabled as a payment provider on the MyQ Server.

Hardware Overview

Recharge terminal specs overview
  • Dimensions - 1200 (H) x 420 (W) x 350 (D) mm.

  • Weight - 60 kg.

  • Floor - Floor mount ready.

  • Security - Security rod lock.

  • Power input - Voltage: 230 V AC / 50 Hz. Arc fault detection device: 10A/1N/C/003.

  • Touch display - 19" LCD with 3 mm thick glass; 1280 x 1024 mm.

  • Card reader - ELATEC/WAVE ID® (PCPROX) readers via virtual COM port connection for user login.

  • Bill reader - Model: JCM UBA-10-SS; Note capacity 500.

  • Coin detector - Model: WH berlin EMP 850.14 v6 (user manual).

  • Coin bag - Lockable cash bag.

  • Circuit breaker - A circuit breaker is an automatically operated electrical switch designed to protect an electrical circuit from damage caused by excess current from an overload or short circuit. Its basic function is to interrupt the current flow after a fault is detected.

  • Nano PC - 4x 1.6GHz core processor - Celeron, 4GB RAM, 275GB/250GB HDD, Windows 10 IoT Enterprise LTSB 2016 Entry.

  • Paper roll - 80mm paper discs; can be adjusted to customer needs.

  • Card dispenser - Model KYT-2124; Supported card thickens - 0.22 mm up to 1.00 mm. Capacity - 200 pcs (with - 0.76 mm).

  • Receipt printer - Model: CUSTOM – TG2480-H (80mm paper discs).

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.