This section describes all the settings that can be changed on the Admin Menu of MyQ TerminalPro. These are basic settings of the terminal, such as the IP address of the MyQ server or login methods.

Lock/Unlock

You can tap Lock / Unlock to permanently lock / unlock the printing device's operation panel.

Common Settings

Server Address - The IP address or the hostname of the MyQ server.

Login

Login Method - If you select one of the two multi-login options, users have to take two steps to successfully log in. You can choose from the following settings:

  • Simple — only one login type is used.

  • ID Card and PIN — The user swipes their ID card, and then enters their PIN.

  • ID Card and password — The user swipes their ID card, and then enters their password.

Login by PIN - With the PIN option selected, users can log in by entering their MyQ PIN.

Login by User Name - With the User name option selected, users can log in by entering their MyQ user name and password.

Login by ID Card - With the ID Card option selected, users can log in by swiping their ID Card.

Log Level

Log Debug Messages - With Log Debug Messages enabled, the terminal generates additional log information for troubleshooting.

Miscellaneous

Idle Logout - If a user forgets to log out from a device after they have finished their tasks and the Idle Logout option is enabled, MyQ logs them out automatically after the idle logout time set on the MyQ web administrator interface expires. With the Idle Logout setting enabled, MyQ auto logout depends on the Copier operation panel idle time setting on the MyQ web administrator interface (in MyQ, Settings, Printers & Terminals). In this mode, each time a button on the MyQ Touch Panel is tapped, the timeout is prolonged; however, tapping buttons on native panels of the printing device (copy panel, scan panel, etc.) does not prolong it. If you disable the option, MyQ auto logout depends on the Panel Reset Timer setting that is set on the printing device's Web UI, under Timer settings. In this mode, every touch of the device display prolongs the timeout.

TCPCONV2 Outbound Network

You can obtain the MyQ TerminalPro address by setting a static IP address.

  • Host IP Address - Static IP address of the terminal.

  • Subnet Mask - Static IP subnet mask.

  • Default Gateway - Address of the default gateway.

Screen Orientation

You can select one of the two screen orientation options:

  1. Portrait — this option needs to be used when the MyQ Touch Panel is held vertically.

  2. Landscape — this option needs to be used when the MyQ Touch Panel is held horizontally.