The FTP server configuration and the SMTP server configuration are automatically done during the application’s installation with remote setup. If the remote setup is used only for changing the configuration of the terminal, these settings aren’t modified.

If those settings were not automatically configured, or if you have manually installed the application, the following settings need to be manually changed on the printing device’s Web User Interface:

  • In order to use Easy Scan, the FTP Server has to be manually configured in the device web UI: Kyocera Web UI > Network settings > Protocol > FTP Client (Transmission).

    FTP server setting on the device web UI
  • In order to use Panel Scan, the SMTP server has to be manually configured in the device web UI: Kyocera Web UI > Function settings > Email > SMTP.

    SMTP settings on the device web UI


The following settings (available on the printing device web UI) are changed within the remote setup of the printing device:

Setting

Value

JOB_AUTHORIZATION_MODE

ON

SERVER_AUTHENICATION_MODE

NETWORK

SERVER_HOSTNAME

MyQ server address

SERVER_PORTNUMBER

PM Server authentication port (Settings > Network)

JOB_ACCOUNTING

ON

AUTO_PANEL_RESET

OFF

CERTIFICATE_VERIFICATION

ON, if a custom certificate is installed. OFF, if the default certificate is installed

UNKNOWN_ID_JOB

ON

SECURE_PROTOCOLS_SSL

ON

SECURE_PROTOCOLS_HTTP_SECURITY

ON

SECURE_PROTOCOLS_IPP_SECURITY

ON

IPP_SECURITY

ON

IPP_SECURITY_PORT

443

IP4_FILTERS

MyQ server address | 255.255.255.255 | LPD | IPP | IPPS | | | |RAW_PORT |

SMTP_PROTOCOLS

ON

SMTP_SERVER_NAME

MyQ server address

SMTP_PORT_NUMBER

MyQ STMP port (Settings > Network)

SMTP_AUTHENICATION_PROTOCOL

OFF

SMTP_SECURITY

OFF, if Enable only secure connection is disabled in MyQ
STARTTLS, if Enable only secure connection is enabled in MyQ

SMTP_SERVER_TIMEOUT

config.ini > [SMTPServer] > timeout

SMTP_EMAIL_SIZE_LIMIT

config.ini > [SMTPServer] > maxMessageSize

SMTP_SENDER_ADDRESS

device@myq.local

SLEEP RULE: NETWORK

OFF (On Kyocera devices supporting this setting)

SLEEP RULE: APPLICATION

OFF (On Kyocera devices supporting this setting)