In the HP Package Manager website you can find the Card Reader page where you can configure card readers, and the General Settings page where you can turn the exploded mode on or off.

Web Browser requirements

  • Google Chrome 63 or higher (Recommended)

  • Mozilla Firefox 57 or higher (Recommended)

  • Internet Explorer 11 or higher

  • Microsoft Edge 14 or higher

  • Safari 10 or higher

Older versions of web browsers will not work as required.

Signing in to the HP Package Manager

To sign in to the HP Package Manager, type the following address into your web browser:
"<https://<hostname>:<numberOfServerPort>/package/hp/admin"

where <hostname> is the hostname/IP address of your MyQ server, and
<numberOfServerPort> is the MyQ Server port (8090 by default).

You will be prompted to sign in by typing the password to your admin account. After that, click Sign in and the HP Package Manager opens.

Signing in to HP Package Manager

To sign out of the HP Package Manager, click the exit icon in the upper-right corner of the screen.

General Settings page

On the General Settings page you can enable or disable the exploded mode UI for the embedded terminal.

HP Package Manager General Settings

If the exploded mode is enabled, the HP native screen is displayed on the embedded terminal.

Exploded mode - sign in

Users can sign in using their MyQ account credentials. Then the MyQ screen is displayed, where they can log in using their MyQ account again.

Exploded mode MyQ log in screen

Once logged in, they can see and use the available terminal actions.

Terminal actions on exploded mode

Exploded mode is also supported in devices with a 4.3” display:

My Jobs on a 4.3” display in exploded mode

My Jobs on exploded mode in a 4.3 display

Easy Scan Profiles on a 4.3” display in exploded mode

Easy Scan Profiles on a 4.3 display in exploded mode

Easy Copy profiles on a 4.3” display in exploded mode

Easy Copy profiles on a 4.3 display in exploded mode

Card Readers page

On the Card Readers page, you can find two sections with card reader settings: the Card Reader Settings, and the HP Card Reader Settings.

Card Readers Settings

Here you can connect new types of card readers by adding the card reader's IDs and serial number. To connect a new type of card reader to your printing device, enter the VID, the PID, and optionally the serial number. Click Submit to add the setting. Added settings can be deleted by clicking the trash icon in the Actions column. After adding new types of card readers, you have to run the Remote setup of the HP Embedded terminals to apply the changes.

MyQ does not guarantee that the newly added card reader types will be compatible with the HP printing devices or that they will properly read your currently used ID cards.

HP Card Reader Settings

These settings are activated by the ON/OFF switch in the upper-right corner. You can configure up to four technologies (Card Settings 1 – 4) for the HP Universal card reader. Each technology can be set on its individual Card Setting tab. After setting the card reader, click Submit. Changes are applied immediately; the Remote setup of the HP Embedded terminals is not required. This setting is applied to all HP printing devices equipped with the HP Universal card reader.