One tap copying. After the user taps this action, the page is immediately copied. You can define the copy parameters in MyQ.

With the Easy Copy feature, users do not have to go to the often complicated and confusing copy screen of the printing device — they can copy directly from the MyQ terminal home screen with a single touch. Upon tapping the button, MyQ can simply proceed copying using the default settings of the printing device, or it can use different values of the Easy Copy action parameters.

The Easy Copy default settings of the printing device can be configured in the HP Web UI, in Copy/Print > Copy Settings > Default Job Options (supported from MyQ HP Embedded terminal 8.2 patch 3+). After changing the parameters in the device’s web UI, the remote setup or a restart of the services is required for updating the default parameters.

HP Web UI - Setting default Easy Copy settings

If the parameter’s Value is set to Default in the MyQ web administrator interface, the terminal will replace it with the device’s default value. If the device’s default value cannot be mapped to MyQ, Default will be displayed.

Easy Copy parameters in MyQ web UI, mapped to the terminal

By adding multiple Easy Copy action nodes and giving rights to different users or groups, you can create a variety of copying options for the selected users and groups.

On the Parameters tab, you can select from a number of options for each parameter. All parameters are dependent on the particular printing device type. Therefore, some values might not be available.

Easy Copy Parameters

Easy Copy parameters on the terminal
  • Copies - Predefine the number of copies to be available 1-99.

  • Color - Color scale of the outgoing file. You can select from the following options:

    • Color

    • Monochrome

    • Automatic

    • Default

  • Duplex - Simplex and Duplex scanning options. You can select from the following options:

    • Single Sided

    • Duplex

    • 1-sided to 2-sided

    • 2-sided to 1-sided

    • Default

  • Size - Size of the scanned input. It determines the size of the scanning area; therefore, it should correspond to the actual size of the scanned paper. You can select from the following options:

    • Automatic

    • A3

    • A4

    • A5

    • A6

    • B4

    • B5

    • B6

    • Folio

    • Ledger

    • Letter

    • Legal

    • Statement

    • Oficio II

    • Default

  • Magnification - With this parameter, you can determine the size of the copy. This way, you can make it smaller or larger than the original file. You can select from the following options:

    • Default

    • Same as original

    • A3

    • A4

    • A5

    • A6

    • B4

    • B5

    • B6

    • Folio

    • Ledger

    • Letter

    • Legal

    • Statement

It is recommended to specify the Magnification parameter and the Size parameter to specific values instead of using the Default value. Size is the parameter for the size of the original, Magnification is the size of the output.

  • Skip blank pages - With this parameter, you can select to skip blank pages in the copied document. You can select from the following options:

    • Default

    • Yes

    • No