Easy Scan Parameters
On the Parameters tab, you can set the scanned file's parameters, such as resolution and format. You can select from a number of options for each parameter.
There are predefined parameters, but you can also create your own parameters.
All parameters are dependent on the particular printing device type. Therefore, some values might not be available.
Some parameters (e.g. resolution, color) significantly influence the scanned file's size. For example, a combination of higher resolution and full color will dramatically increase the file size.
You can allow users to change their scan settings from the terminal screen.

To do this, you have to modify the settings of the particular parameter on the Parameters tab on the Easy Scan action node properties panel. Open the parameter properties panel, uncheck the Prohibit change of value option (checked by default) and Save.
Predefined Parameters
Each parameter has a Default option. If selected, the actual values are taken from the default scan settings of the printing device.
Resolution - The outgoing file's resolution. You can select from the following options:
100 dpi
200 dpi
300 dpi
400 dpi
600 dpi
1200 dpi
Default
Color - The outgoing file's color scale. You can select from the following options:
Color
Grayscale
B&W (two tones)
Automatic
Default
Format - The outgoing file's format. You can select from the following options:
PDF
JPEG
TIFF
XPS
Default
The combination JPEG with color Automatic or B&W is not valid. Just as TIFF with Automatic. The terminal will sent a PDF in case an invalid parameter combination is used.
Duplex - Simplex and Duplex scanning options. You can select from the following:
Single Sided
Duplex
Default
Original Image - Determines the way in which the printing device is going to process the scanned page.
You can select from the following options:Text + Photo
Photo
Text
Default