Skip to main content
Skip table of contents

Basic Information

The MyQ Xerox Embedded terminal is a web based embedded terminal. No applications are running
directly on the printing device, all files are saved in the MyQ directory, and the device exchanges data with MyQ using XML. Web terminals are based on HTML, CSS, XML, and JavaScript languages and communicate via HTTP or HTTPS.

The terminal enables simple management of print jobs on a touchscreen display and offers a number of advanced features, such as multiple login options, or scanning by a single touch. It can communicate with multiple types of USB card readers.


  • .NET 4.7.2 or newer needs to be installed on the MyQ Print server.

  • Credit has to be enabled on the MyQ Print server before the installation of the embedded terminal (Xerox EIP 4.0).

  • The latest firmware needs to be installed on the printing device.

  • The IP or Hostname of the printing device has to be valid.

  • The correct time and date must be set on the printing device to avoid issues with the Scan to Me functionality.

  • MyQ server 7.5.2+ and Xerox Embedded 7.5.0+ are required.

On older Xerox EIP platforms (3.0 and lower) only basic Embedded terminal functions are supported:

  • Print all after logging in - all spooled jobs are printed automatically after login; there is no possibility to select the jobs before printing. This feature depends on the device model.

  • The basic terminal actions are Panel Copy and Panel Scan. In some cases, printing and scanning from USB are also available.

For information about communication protocols and ports, check the MyQ Print Server guide.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.