Skip to main content
Skip table of contents

Configuration on OSA 5.0+

  1. Log on the printing device Web UI as an administrator (http://*IPAddress of the device*).

  2. Open the System Settings tab.

    5.0 web UI - Opening system settings
  3. On the tab, click Sharp OSA Settings. The Sharp OSA Settings tab opens.

    5.0 web UI - System settings
  4. On the menu on the left side of the tab, click External Accounting Application Settings. The External Application Settings tab opens to the right.

    5.0 web UI - Opening external accounting application settings
  5. On the tab, enable External Account Control (External Account Control = Enable), and then select the Set Authentication Server (Server1) option. Additional settings become available.

    5.0 web UI - External accounting application settings
  6. Make sure that the Server 1 setting is enabled (Server 1=Enable), and then set the following options:

    5.0 web UI - Server settings
    1. Application Name: MyQ

    2. Address for Application UI: http://*MyQServerIP*:*Port*/app/home/dispatch
      (MyQServer is the IP address or hostname of the MyQ server and Port is the port of the Sharp terminal package).

    3. Address for Web Service: http://*MyQ ServerIP*:Port/soap/MFPSoapWS
      (MyQServer is the IP address or hostname of the MyQ server and Port is the port of the Sharp terminal package).

    4. Deselect Extended Platform.

    5. Browser: HTML Browser 3.5 (This option is not available for OSA 5.5).

    6. Data Size: Wide-SVGA.

  7. Click Submit at the top left corner of the tab. When you are asked to reboot the device, click Reboot Later(O).

  8. On the menu on the left side of the tab, click Standard Application Settings. The Standard Application Settings tab opens.

    5.0 web UI - Opening standard application settings
  9. Check if the MyQ application is displayed on the tab.

    1. If it is not, click Add (Y) to create it.

      5.0 web UI - Adding application
    2. If it is, click MyQ to open the application's settings.

      5.0 web UI - Opening MyQ application
  10. On the tab, set the following options:

    5.0 web UI - MyQ application registration settings
    1. Application Name: MyQ.

    2. Address for Application UI: http://*MyQServerIP*:*Port*/app/acm
      (MyQServer is the IP address or hostname of the MyQ server and Port is the port of the Sharp terminal package).

    3. Deselect Extended Platform.

    4. Browser: HTML Browser 3.5 (This option is not available for OSA 5.5).

    5. Data Size: Wide-SVGA.

  11. Click Submit at the top left corner of the tab. When you are asked to reboot the device, click Reboot Now(C).

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.