Skip to main content
Skip table of contents

Basic Information

The MyQ Sharp Embedded terminal is a web based embedded terminal, no applications are running directly on the printing device, no data is stored on the device; all files are saved in the MyQ directory and the device exchanges data with MyQ via the HTTP protocol. The communication port is set manually within the installation of the terminal.

The terminal enables simple management of print jobs on a touchscreen display and offers a number of advanced features, such as multiple login options, or scanning by a single touch. It can communicate with multiple types of USB card readers.

Requirements

  • The terminal requires a printing device equipped with a hard drive.

  • AMX3 license has to be activated on the printing device.

  • SNMP has to be active on the printing device.

  • .NET 4.7.2 or newer needs to be installed on the MyQ print server.

  • The latest firmware needs to be installed on the printing device.

  • The IP or Hostname of the printing device has to be valid.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.