Additional Configuration

Before you can start using the terminal, you need to change multiple settings of the printing device. The location of these settings on the printing device's Web UI slightly varies depending on the OSA platform.

The following sections describe the setup in two types of the Web UI: the legacy interface of the OSA 4.5 or lower platforms, and the modern interface of the OSA 5.0+ platform.

Configuration on OSA 4.5 or lower

1. Log on the printing device's Web User Interface as an administrator (http://*IP Address of the device*).

2. On the menu on the left side of the Web UI screen, click Application Settings. The Application Settings drop-down menu opens.

   

3. On the menu, click External Application Settings. The External Application Settings drop-down menu opens.

   

4. On the menu, click External Accounting Application Settings. The External Application Settings tab opens to the right.

   

5. On the tab, enable External Account Control (External Account Control = Enable), and then select the Set Authentication Server (Server1) option. Additional settings become available.

   

6. Make sure that the Server 1 setting is enabled (Server 1=Enable), and then fill in the following:

   

   1. Application Name: MyQ

   2. Address for Application UI: http://*MyQServerIP*:*Port*/app/home/dispatch
      (MyQServer is the IP address or hostname of the MyQ server and Port is the port for the Sharp terminal package).

   3. Address for Web Service: http://*MyQ ServerIP*:Port/soap/MFPSoapWS
      (MyQServer is the IP address or hostname of the MyQ server and Port is the port for the Sharp terminal package).

7. Depending on the platform, you may or may not see the Extended Platform and the Display Style settings. If they are available, set them to the following values:

   

   1. Display Style: Full

   2. Deselect Extended Platform

8. Click Submit at the top left corner of the tab. When you are asked to reboot the device, click Reboot Later(O) to submit the changes.

9. On the menu, under External Application Settings, click Standard Application Settings. The Standard Application Settings tab opens.

   

10. Check if the MyQ application is displayed on the tab.

    1. If it is not, click Add (Y) to create it.

       

    2. If it is, click MyQ to open the application's settings.

       

11. On the tab, set the following options:

    

    1. Application Name: MyQ

    2. Address for Application UI: http://*MyQServerIP*:*Port*/app/acm
       (MyQServer is the IP address or hostname of the MyQ server and Port is the port of the Sharp terminal package).

12. Depending on the platform, you may, or may not see the Extended Platform and the Display Style settings. If they are available, set them to the following values.

    1. Display Style: Full

    2. Deselect Extended Platform

13. Click Submit at the top left corner of the tab. When you are asked to reboot the device, click Reboot Now(C) to submit the changes and reboot the device.