MyQ Server port requirements
The following table lists the receiving ports and protocols required for the MyQ Server operation.
Receiving | Sending | Receiving | Protocol | FW rule | Description |
|---|---|---|---|---|---|
21 | Printer | MyQ Server | TCP | Inbound | FTP for opening a connection |
49152- | Printer | MyQ Server | TCP | Inbound | FTP for actual file copy |
25 | Printer | MyQ Server | TCP | Inbound | Used by SMTP protocol to deliver scanned files from printer to MyQ |
25/467/587 | MyQ Server | SMTP Server | TCP | Outbound | Used by SMTP protocol for sending outgoing emails from MyQ. Port depends on SMTP server |
443 | MyQ Server | License activation server | TCP | Outbound | License activation server. The IP address of the MyQ license server is 40.127.240.109 (license2.myq.cz), The old license server (license.myq.cz) runs on 13.74.29.11:443. |
110 | MyQ Server | POP3 server | TCP | Outbound | POP3 |
143 | MyQ Server | IMAP server | TCP | Outbound | IMAP |
161 | MyQ Server | Printer | UDP | Outbound | Used by SNMP protocol for |
389 | MyQ Server | LDAP Server | TCP | Outbound | LDAP Server |
443 | MyQ Server | Printer | TCP | Outbound | Used by IPPS protocol for print job transmission from MyQ to printing devices |
515 | SJM/User PC | MyQ Server | TCP | Inbound | Port used by LPR to accept print jobs |
515 | SJM/User PC | Printer | TCP | Used by LPR protocol to send a print job to the printer | |
631 | MyQ Server | Printer | TCP | Inbound | Used by IPP protocol Mobile print via IPP. Kyocera Mobile Print (KMP) |
631 | MyQ Server | Printer | TCP | Outbound | Used by IPP protocol for print job transmission from MyQ to printing devices |
636 | MyQ Server | LDAP Server | TCP | Outbound | LDAPS Server |
717 | Mobile | MyQ Server | TCP | Inbound | Mobile print via IPPS |
8631 | Mobile | MyQ Server | TCP | Inbound | Job spooling via the |
993 | MyQ Server | IMAPS Server | Outbound | IMPAS | |
3050 | MyQ Central | MyQ Site Server | TCP | Inbound | Used by protocol for |
8090 | Various | MyQ Server | TCP | Inbound | Used by HTTP protocol for |
9090 | MyQ Server | Embedded | TCP | Outbound | Necessary for remote setup of Kyocera Embedded Terminals |
9091 | MyQ Server | Embedded | TCP | Outbound | Necessary for remote setup of Kyocera Embedded Terminals |
9093 | Terminal Lite | PM Server | TCP | Inbound | Needed for features of PM Server - Authentication/ Authorization |
9094 | PM Server | Terminal Lite | TCP | Outbound | Needed for features of PM Server - Driver access, Mobile access (Kyocera mobile print app), |
9095 | PM Server | Terminal Lite | TCP | Outbound | Needed for features of PM Server - Spooler service |
9097 | PM Server | Terminal Lite | TCP | Outbound | Needed for features of PM Server - Log information event |
9098 | PM Server | Terminal Lite | TCP | Outbound | Needed for features of PM Server - Job status event |
9099 | PM Server | MyQ Server | TCP | Needed for features of PM Server - Thrift access. Only local communication | |
9100 | MyQ Server | Printer | TCP | Outbound | Used by Raw protocol for print job transmission from MyQ to printing devices |
9101 | MyQ Server | PM Server | TCP | Outbound | Needed for features of PM Server - User Session service |
8631 | User PC | MyQ Server | TCP | Inbound | Needed for secure job receiving |
10010 | User PC | Embedded | TCP | Port for direct print. The job is automatically printed after it is received by the printing device | |
10011 | User PC | Embedded | TCP | Port for secured hold print. The job is spooled by the printer and waits there till the user logs in and prints it. It is not possible to print this job on other than this particular printing device | |
10012 | User PC | Embedded | TCP | Port for Device Spool pull print. The job is spooled by the printing device. Once the user logs on any of the devices connected to the same subnet, information about this job is provided and the job is displayed in the list of the available jobs and can be printed | |
10013 | User PC | Embedded | TCP | Port for Device Spool delegated print. Works the same as the Device Spool pull print, except that the job can be printed by delegates of the sending user | |
10040 | MyQ Server | Embedded | TCP | Outbound | MyQ Printing Protocol (Secure) - MPP(S) |
11108 | Embedded | MyQ Server | UDP | Inbound | Used for communication with terminals |
11108 | Terminal | Embedded | TCP | Outbound | Communication between Terminal Manager and Terminals |
11112 | MyQ Server | SJM/SPS | UDP/TCP | Inbound | Smart Job Manager and Smart Print Services communication with MyQ |
11112 | MyQ Server | SJM | UDP/TCP | Outbound | MyQ sending data to SJM |
8632 | TCP | Inbound | Used for job spooling via the AirPrint/MOPRIA protocol | ||
8093 | TCP | Used by the HTTPS protocol for accessing the MyQ Central server web interface | |||
8083 | TCP | Used by the HTTP protocol for accessing the MyQ Central server web interface (disabled in default settings) | |||
3051 | TCP | Used by protocol for |