After the configuration in ScannerVision is done, you need to create a MyQ Smart Workflow in Terminal Actions.

  1. Go to MyQ, Settings, Terminal Actions.

  2. Right-click any item on the preview and point on Add action behind this action in the shortcut menu and select the External Workflow action node. The node is added to the list and the terminal preview and its properties pane opens on the right side.

    Adding the External Workflow action node
  3. Fill out the External workflow properties as follows:

    External Workflow action properties


    a. Enter a Title. After saving, this will be shown as the name of the External workflow action in the Home screen pane and on the terminal preview.
    b. Enter the URL of the ScannerVision server; ScannerVisionServer:port. http or https depends on the ScannerVision server settings.
    The port number is not required if the default settings (80 for non SSL and 443 for SSL) are used on the ScannerVision server. If the port was changed, the port number is required. For example: https://10.14.5.125 for SSL only with the default port used and
    http://10.14.5.125:81 for non SSL and the port was changed from 80 to 81.
    c. Change the Printers and/or Rights if you want to create a specific MyQ Smart Workflow.
    d. Click Save.