Skip to main content
Skip table of contents

Setting idle logout on Xerox EIP 3.7

The idle logout period can be changed on the device Web UI. The time before the logout depends on the Touch User Interface System Timeout setting on the printing device's web user interface. Every touch of the device touch panel display prolongs this timeout.

  1. Log on to the printing device's web user interface as an administrator.

  2. On the System tab, click Timeouts. The Timeouts dialog box opens.

    System setting on the EIP 3.7 web UI

  3. Under Reset Device Control Panel, set System Timeout to the preferred value (between 10 and 900 seconds), and click OK.

    System timeout setting on the EIP 3.7 web UI

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close